Casting & Forming
AlphaPlast PUR Rigid Foams
AlphaPlast allows for optimal processing time, which enables adequate time from stirring to filling the mould. The formed parts do not
shrink and have a very high heat distortion point.
AlphaPlast® H200 PU Foam
For stump embedding to convert the casting resin stump sleeve into a thick walled fitted part.
Can also be used for hard compensations not subject to high stress, especially for greater
length discrepancies.
Mixing ration: A:B = 100:100 parts by weight.
Code
Size
TK1580
4.6Kg
TK1578
865g
AlphaPlast® H300 PU Foam
For smaller highly stressed parts such as short leg compensations.
Mixing ration: A:B = 100:100 parts by weight.
Code
Size
TK1584
4.6Kg
TK1572
865g
AlphaPlast® H700 PU Foam
Impact and nail resistant rigid foam, especially for orthopaedic shoe lasts and shoe forms as
well as positive moulds in the entire orthopaedic range.
Mixing ration: A:B = 100:100 parts by weight.
Code
Size
TK1588
4.6Kg
TK1586
865g
AlphaPlast® Component B
For all AlphaPlast rigid foams.
Code
Size
TK1592
4.6Kg
TK1590
865g
For technical advice, please visit
www.algeos.com
17
