Issue link: http://algeo.uberflip.com/i/145583
Casting & Forming AstiTech PU Foams This open-cell, rub-resistant flexible foam has very high resilience for the manufacture of various padded parts. The Shore A hardness of the final product can be adjusted by the fabricator by pre-mixing different A components in the desired ratio. AstiTech® 150 PU Foam For the manufacture of forefoot replacement, flexible foam insoles, custom shoe bedding, seats and individual paddings. Density approx. 200Kg/m³, foaming factor approx. 5.3. Mixing ration: A:B = 100:50 parts by weight. Code Size TK1596 2.5Kg TK1594 865g AstiTech® 300 PU Foam For the manufacture of forefoot replacement, flexible foam insoles, custom shoe bedding and individual paddings. Density approx. 280Kg/m³, foaming factor approx. 3.8. Mixing ration: A:B = 100:50 parts by weight. Code Size TK1600 2.5Kg TK1598 865g AstiTech® 500 PU Foam For the manufacture of forefoot replacement, flexible foam insoles, custom shoe bedding, seat shells and individual paddings. Density approx. 510Kg/m³, foaming factor approx. 2.1. Mixing ration: A:B = 100:50 parts by weight. Code Size TK1504 2.5Kg TK1502 865g AstiTech® Component B For all AstiTech flexible foams. The B component is sensitive to cold and should not be stored at temperature below 15°C. Code 2.5Kg TK1608 865g TK1606 16 Size TK1610 433g For more products like this visit www.algeos.com