Algeos

Prosthetics Polyester Resins Acrylic Sealing Resin Rigid Acrylic Sealing Resin. Sealing is used for bonding acrylic, wooden and PUR-rigid foam parts, for sealing leather and for laminating very hard parts. Can be mixed with all other acrylic resins. Curing by means of 1 – 3 % hardener paste or hardener powder 50, depending on the purpose it is possible to achieve fast cure times. Code Size TK1212 900g TK1214 4.6kg Polyfest Rigid, already pre-accelerated polyester casting resin. Can be mixed with Polyflex. Curing by means of approx. 3% hardener paste or hardener powder 50 or approx. 7% hardener powder 20. Code Size TK1204 1kg TK1206 5kg Polyflex Elastic, non-accelerated polyester casting resin. Can be mixed with Polyfest. Curing by means of 2% accelerator and approx. 3% hardener paste or hardener powder 50 or approx. 7% hardener powder 20 per 100g resin. Code Size TK1200 1kg TK1202 5kg Amine Accelerator 10% Amine accelerator, exclusively for accelerating polyester resins and fillers. Dosage according to the specifications on the containers. The accelerator with a percentage of 10% has to be blended with the resin before adding the hardener. Hardener and accelerators should never be in direct contact, explosion hazard! Code Size TK1274 50ml Thinner P for Polyester Resins Thinner based on styrene, exclusively for diluting polyester resins and fillers. Dosage: Small amount, not more than 10%, otherwise difficulties with hardening may arise. Code Size TK1270 1 Litre For technical advice, please visit www.algeos.com 33

• Cover